Handyman #4 Smoother by Stanley
Stanley Handyman #4 Smoother
This is the Handyman that i restored in this video series
L Bailey #12 Scraper - Pre- Stanley
I believe this is a L Bailey #12 Scraper - Pre- Stanley
The blade is a replacement fashioned from a saw plate.
Additional Stanley Examples
(My #12-040424-1)
Stanley #1 (repaired)
A repaired Stanley #1 (The second #1 shown is a WoodRiver)
There are pictures of what it looked like before restoration and after. The body had been brazed. I had flattened it, spruced it up a bit and I used this plane for several years.
The...
Stanley #1 Smoother
Note the cracked cheek
Here are Stanley #1 Dimensions. https://www.timetestedtools.net/2021/05/16/stanley-number-1-hand-plane-dimensions/
Additional Stanley Examples
My #1-090323-1...
Stanley #12 Scraper Plane
STANLEY #12 Scraper Plane
This came to me without a blade. I used a heavy saw blade to make a new blade.
A previous user has added a rosewood sole. Based on the square nuts it was most likely done a long time ago.
Tested on oak and maple
...
Stanley #12 Sweetheart Scraper
This SW Stanley #12 came to me as an ugly green painted base only. It's been stripped and repainted in my usual way. I turned a handle from spalted Maple. Finish on the maple is BLO. The blade is from a crosscut saw. It sharpened and hooked.
...
Stanley #2 Smoother
Stanley #2 Smoother
Note the knob seems a little oversized for a #2. I thought about finding a smaller one, but if it's to be a user with someone with larger hands, it seems it would fit well.
The orange frog makes it a little harder to find.
...
Stanley #2 Smoother
Stanley #2 Smoother
This plane is a nice user #2. It has some pitting on one side and note the gnaw m arks on the cap. Nothing from keeping the plane from being a fine user for another 100 years.
The rosewood is original and in excellent shape.
...
Stanley #2 Smoother
Stanley #2 Smoother
It has a few imperfections, but nothing from making it a fantastic user. Look close at the photos. The flaws: the peened blade, the low knob, and the hang hole, are all user added, but all I did was give it a quick sharpening and...
Stanley #203 Bench Bracket
Stanley #203 Bench Bracket
Mainly used to hold a long board against the front of a workbench to facilitate planing the board's top edge. This one still has most of it's japanning.
Example of Use Stanley 203 Bracket typical usage.
Stanley #26 Transitional Jack Plane Type 6
Stanley #26 Transitional Jack Plane Type 6 1874-1884
Additional Stanley Examples
(My #26-031923-4)
STANLEY #27 1/2 TRANSITIONAL – TYPE 16
#27 1/2 Jack plane 15"L, 2 1/4"W, 4 3/4lbs, 1898-1934.
Stanley
(MY #27.5-081017-9)
Stanley #278 Rabbet Plane
Stanley #278 Rabbet Plan
This is a dual-purpose plane - the primary function is to cut rabbets.
Complete and in very good shape. A rare find.
This is a dual-purpose plane - the primary function is to cut rabbets. The plane is ground on both sides so...
Stanley #29 Transitional – Type 6 – Pre-lateral
STANLEY #29 Transitional – Type 6 – Pre-lateral
STANLEY #29 Fore plane 20"L, 2 3/8"W, 6 1/4lbs, 1870-1918.
//
Stanley #3 Smoother TYPE 4 Pre-Lateral
STANLEY #3 Smoother TYPE 4 Pre-Lateral
STANLEY #3 Smooth plane, 8"L, 1 3/4"W, 3 1/8lbs, 1869-1984.
A nice early example of the Stanley Bailey Jack.
Original Japanning about 90%
STANLEY #3 Smoother TYPE 4 Pre-Lateral
//
Stanley #37 TRANSITIONAL – TYPE 9 JENNY
STANLEY #37 Transitional – Type 9 Jenn
STANLEY #37 Jenny plane 13"L, 2 5/8"W, 5lbs, 1870-1923.
excerpt from supertool.com - “The name "Jenny" is unique to this plane. Since this plane is slightly shorter than the metallic jack plane, a p...
Stanley #45 Combination Plane
Stanley #45 Combination Plane with Partial set of cutters, Long and short rods and both fences
Everything seems to work as it should
Stanley Examples
(My #45-091024-1)
Stanley #48 SW T&G Plane
Stanley #48 SW T&G Plane
A complete Stanley Sweetheart #48 Tongue and Groove Plane.
Include original blades which are typically missing at lease one of them.
As written on supertool.com: “#48 Tonguing and Grooving P...
Stanley #48 Tonguing and Grooving Plane
Stanley #48 Tonguing and Grooving Plane
This is one of Stanley's better planes to use, and even the most ham-fisted power tool junkie can handle this plane and be amazed by its results. It works well, is practically indestructible, and is very versatile...
Stanley #49 Tonguing and Grooving Plane
Stanley #49 Tonguing and Grooving Plane, 10"L (9"L 1937 on), 3/16"W, 2 3/4lbs, 1877-1944.
This plane was not in great shape when I found it. Some of the nickel plating has been lost with time and the spring no longer works as it once did, but it...
Stanley #5 1/4 Junior Jack with Custom Aluminum Knob
Stanley #5 1/4 Junior Jack with Custom Aluminum Knob and original aluminum tote
Additional Stanley Examples
(My #525-020523-3)
Stanley #5 Jack (Blue)
Stanley #5 Jack (Blue)
(adsbygoogle = window.adsbygoogle || []).push({
google_ad_client: "ca-pub-1267137695501695",
enable_page_level_ads: true
});
Stanley #5 Jack Plane
Stanley #5
Note the horn was missing and was repaired with my 3 part repair.
It still has some paint spatters and japanning is about 70%
Blade is sharpened with a camber for a jack plane
note the brass replacement for a tote screw. I polished ...
Stanley #71 1/2 Router Plane
Note the replacement knobs and the irregular adjuster. This adjuster applies downward adjustments only. To raise the blade you would loosen the clamp and manually slide it against the knob. (a replacement adjuster knob could be found on any 71 or 71 1/2...
Stanley #71 1/2 Router Plane
71 1/2 Router plane, 7 1/2"L, various widths, 2 1/8lbs, 1896-1949.
Lightly cleaned and oiled.
Additional Stanley Examples
(My #71-080723-1)
Stanley #71 Router Plane
71 Router plane, 7 1/2"L (7 5/8", 1962 on), various widths, 2 5/8lbs, 1885-1973.
Lightly cleaned. Hardwood knobs lightly sanded and lacquered.
Additional Stanley Examples
(My# 71-080623-1)
Stanley #71 Router Plane
71 Router plane, 7 1/2″L (7 5/8″, 1962 on), various widths, 2 5/8lbs, 1885-1973.
Lightly cleaned, New knobs sanded and lacquered.
One blade included
Additional Stanley Examples
(My #71-082823-1)
Stanley #75 Bull Nose Rabbet Plane
Stanley #75 Bull Nose Rabbet Plane
4 1/8" Long - 1 1/16" blade
(My #75-090520-1)
Stanley #78 Duplex filletster and rabbet plane
#78 Duplex filletster and rabbet plane, 8 1/2"L 1 1/2"W, 3lbs, 1885-1973.
Excerpt for supertool.com
"This is another popular Stanley plane, on which the company built a great fortune. Nearly every workman of the time had one of these planes in ...
Stanley #80 SW Scraper Plane
Stanley #80 SW Scraper Plane or cabinet scraper
Additional Stanley Examples
(My #80-091424-7)
Stanley #81 with Hock Blade
Replace wood on base (I believe it is oak)
The Hock blade is a $30 value.
Additional Stanley Examples
(My #81-091424-9)
Stanley #9 1/2 Block Plane Type 2
Stanley #9 1/2 Block Plane Type 2
Additional Stanley Examples
(My #9.5-032023-1)
Stanley #9 1/2 Block Plane Type 2 (Red)
Stanley #9 1/2 Block Plane Type 2 (Red)
I have had discussions about the red color. Some Stanley folks believe it was a special run from Stanley. Several have been observed.
(My #9.5-032023-2)
Stanley #95 butt gauge
Stanley #95 butt gauge
A Stanley No 95 Butt Gauge is Nickel plated cast iron and is used for marking rabbet jams, thickness of butts, mortises and marking, plus for squaring the edge of a butt hinge.
-
Additional ...
Stanley #A5 Jack Plane
Stanley #A5 Jack Plane
STANLEY #A5 Jack plane, 14"L, 2"W, 2 5/8lbs, 1925-1935.
The bed and frog on the A5 are made from aluminum, which makes the plane lighter. This was the supposed appeal of these planes, that they are lighter than the iron...
Stanley #S4 Smoothing Plane
Stanley #S4 Smoothing Plane
offered 1869 - 1984 ..........................9" long with a 2" cutter
Additional Stanley Examples
(My #S4-031423-4)
Stanley #S5 JACK
STANLEY #S5 JACK
This planes only shortcoming is most of the japanning is gone. You may be able to make out a brownish patina in the pictures. That is probably some kind of wax from the care of the previous owner. The blade is in excellent shape....
Stanley Bench Plane Type 1 examples
More Stanley type 1 Examples Look for Future additions
————-
Stanley Bench Plane Type 2 examples
More Stanley type 2 Examples
Stanley #4 Smoother Type 2 Pre-lateral
This Stanley #4 Smoother has a Type 2 base. It has the recessed brass adjuster like a type 4, this could have been changed or it could be from the early type 4 period.
The type 2 was made 1869-1872. The Type 4 was...
Stanley #6 Foreplane Type 2 Prelateral
STANLEY #6 FOREPLANE TYPE 2 PRE-LATERAL
Stanley Type Study -->
(My# 6-011323-2)
Stanley #6 type 2 fore plane
(My #6-100320-1)
Stanley #6 type 2 fore plane
Here is a type 2 #6. It needs to ask for some forgiveness, but for its usability will not be one of then. The lever cap, cutter and chip breaker are later vintage. The Tote is also a replacement....
Stanley Bench Plane Type 3 examples
More Stanley type 3 Examples
Stanley #4 Type 3 Smoother
Stanley #4 Type 3 Smoother
The only issue is a very old repair on the tote. It seems solid.
More Stanley type 3 Examples
(My #4-090720-2)...
Stanley Bench Plane Type 4 examples
More Stanley type 4 Examples
Stanley #4 Pre Lateral Smoother
Stanley #4 Pre Lateral Smoother
This came to me with a Fulton blade. I’ve added a vintage correct blade, but will send the Fulton. I have NOT tuned this plane in any way. I’ll leave that to the new owner if they decide to use it. I have dom...
Stanley #6 type 4 Fore Plane
Stanley #6 type 4 Fore Plane
More Stanley type 4 Examples
(My #100322-1)
Stanley #8 Jointer Plane Type 4
Stanley #8 Jointer Plane Type 4. Cleaned and tuned. A knob replacement and a Blade replacement. The blade is new old stock but from a later vintage. See photos for japanning. Lots of white paint spatters. This will now be a nice users for another 150...
Stanley #8 JOINTER TYPE 4 PRE-LATERAL
STANLEY #8 JOINTER TYPE 4 Pre-Lateral
STANLEY #8 Jointer, 24"L, 2 5/8"W, 9 3/4lbs, 1898-1961.
See the photo’s they tell the story.
A nice early example of the Stanley Bailey Jointer. The japanning was in rough shape when I found it so it’s bee...
Stanley Bench Plane Type 5 examples
More Stanley type 5 Examples
Stanley #7 Type 5 Jointer
Stanley #7 Type 5 Jointer
7 Jointer, 22"L, 2 3/8"W, 8 1/8lbs, 1869-1970.
Additional Stanley Type 5 Examples
Stanley Bench Plane Type 6 examples
More Stanley type 6 Examples
Stanley #4 TYPE 6 SMOOTHER
STANLEY #4 TYPE 6 SMOOTHER
According to PTAMPIA The Stanley-Bailey Type 6 was 1888-1892
This Plane is completely tuned sharpened and tested
Note some minor pitting. See photos and feel free to ask any questions.
SEE THE PHOTOS AND FEEL FREE TO ...
Stanley Bench Plane Type 7 examples
More Stanley type 7 Examples
Stanley #4C Type 7 Smoothing Plane
Stanley #4C Type 7 Smoothing PlaneCompletely disassembled and lightly cleaned and oiled.Furniture waxed.Just sharpen and go
More Stanley type 7 Examples
(my #4C-082823-2)
Stanley Bench Plane Type 8 examples
More Stanley type 8 Examples
Stanley #4 SMOOTHING PLANE. TYPE 8.
STANLEY #4 SMOOTHING PLANE. TYPE 8.
This plane has been completely restored, tuned and sharpened.
See detailed pictures. The blade has some pitting on the top and some minor pitting about 1/4” in on the back opf the cutting edge. Once you’ve sharpened to ...
Stanley #4C Type 8 Smoothing Plane
Stanley #4C Type 8 Smoothing Plane
Completely disassembled and lightly cleaned and oiled.
Furniture waxed.
Just sharpen and go
More Stanley type 8 Examples
(My #4C-082723-3)
Stanley Bench Plane Type 9 examples
More Stanley type 9 Examples
Stanley #4 SMOOTHING PLANE. TYPE 9.
STANLEY #4 SMOOTHING PLANE. TYPE 9.
Type 9 Stanley #4 that has been completely restored
According to PTAMPIA the type 9 was made 1902-1907
More Stanley type 9 Examples...
Stanley Bench Plane Type 10 examples
More Stanley type 10 Examples
Stanley #5C Jack Plane Type 10
Stanley #5C Jack Plane Type 10
The blade has some minor pitting so it is sharpened with a camber for semi-rough work.
Overall it is in excellent condition. The horn has been replace on the tote. The knob is original. It almost looks like a previous...
Stanley Bench Plane Type 11 examples
More Stanley type 11 Examples
Stanley #4C Type 11 SMOOTHER
STANLEY #4C Type 11 SMOOTHER
A type 11 Stanley smoother with a sweetheart blade
This plane has been stripped and refinished. It’s completely tuned and sharpened.
Note the laminated horn repair. The lamination makes it stronger and less likely to b...
Stanley Bench Plane Type 12 examples
More Stanley type 12 Examples
Stanley Bench Plane Type 13 examples
More Stanley type 13 Examples
Stanley #3 Sweetheart Smoothing Plane. Type 13.
Stanley #3C Sweetheart Smoothing Plane. Type 13.
Original rosewood knob and tote. No cracks or repairs. I have only oiled them.
Lightly cleaned
Note some green paint still visible.
Note the chip from the rear of the side.
Fully tuned, sharpened...
Stanley #4 Type 13 Smoothing Plane
Stanley #4 Type 13 Smoothing Plane
Completely disassembled and lightly cleaned and oiled.Furniture waxed.Just sharpen and go
More Stanley type 13 Examples
(My #4-082823-3)
Stanley Bench Plane Type 14 examples
More Stanley type 14 Examples
A few Stanley Bench Plane Type 14
If you have examples that I could add, please email them to me (don at timetestedtools dot net)
Type 14
Stanley Bench Plane Type 15 Examples of Stanley Bench plane in other sizes
Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #6 Type 14 Fore Plane
Stanley #6 SW Type 14 Fore Plane
Type 14 1929-1930 https://www.timetestedtools.net/2016/01/27/stanley-type-14/
The type 14 was the first type to have the raised rib under the front knob.This plane has been lightly cleaned and sharpened. It is...
Stanley Bench Plane Type 15 examples
More Stanley type 15 Examples
Stanley #3 type 15 Smoother
Stanley #3 type 15 Smoother
More Stanley type 3 Examples
(My # 3-050122-2)
Stanley #4 Smoothing Plane Type 15
Stanley #4 Smoothing Plane Type 15, cleaned oiled tuned and sharpened.
More Stanley type 15 Examples
(My #4-083023-1)
Stanley #4 SWEETHEART SMOOTHING PLANE. TYPE 15.
STANLEY #4 SWEETHEART SMOOTHING PLANE. TYPE 15.
The knob and tote are original.
Actual Plane spec’s
· Length 9″
· Width 2 3/8″
· Cutter width 2″
· weight 3# 7.4 oz
...
Stanley Bench Plane Type 16 examples
More Stanley type 16 Examples
Stanley #4 Smoother Type 16
Stanley #4 Smoother Type 16
This Stanley #4 Smoother Type 16 has has just enough rust removed to feel confident there are no cracks or breaks. The back of the iron has been flattened and iron sharpened.
The tote had a nasty multi part break...
Stanley #4C Jack Plane Type 16
Stanley #4C Type 8 Smoothing PlaneCompletely disassembled and lightly cleaned and oiled.Furniture waxed.
More Stanley type 16 Examples
(My #4-083023-3)
Stanley Bench Plane Type 17 examples
More Stanley type 17 Examples
Stanley #4 Type 17 Smoothing Plane
Stanley #4 Type 17 Smoothing Plane
Completely disassembled and lightly cleaned and oiled.Furniture waxed.Just sharpen and go
More Stanley type 17 Examples
(My #4-082823-4)
Stanley #5 1/4C Type 17 Junior Jack
Stanley #5 1/4C Type 17 Junior Jack (see more on the #5 1/4 story )
AN excerpt from supertool.com "The corrugated version of the #5 1/4 . A tough plane to find, if you're smitten by the collecting bug. It's the scarcest plane of the entire Bailey series ...
Stanley Bench Plane Type 18 examples
More Stanley type 18 Examples
Stanley #4 Type 18 Smoothing Plane
Stanley #4 Type 18 Smoothing Plane
Completely disassembled and lightly cleaned and oiled.
Furniture waxed.
Just sharpen and go
More Stanley type 18 Examples
Stanley Bench Plane Type 19 examples
More Stanley type 19 Examples
Stanley #4 Type 19 Smoother
Stanley #4 Type 19 Smoother
Additional examples of type 19's are here
(My #4-062022-1)
Stanley Defiance Line
click here for Defiance history and info —>
Defiance #1204 Smoothing Plane by Stanley
This is a cleaned Defiance #1204 Smoothing Plane. It’s been sharpened and tuned and only lightly cleaned. This is a great low cost smoothing plane.
The knob an d tote are original with most of the original finish missing.
Japanning (or actually g...
Defiance #1204 Smoothing Plane by Stanley
Defiance #1204 Smoothing Plane by Stanley
https://www.timetestedtools.net/2016/01/27/stanley-defiance-line/
Additional Stanley Defiance Examples
(My #1204-020623-2)
Defiance #1205 Jack Plane
Defiance #1205 Jack Back to the Defiance Page
Additional Stanley Examples
(My# 1205-011523-2)
Defiance #1213 1/2 by Stanley
Stanley Defiance #1213 1/2 Back to the Defiance Page
This is said to be the the rarest or one of the rarest Defiance planes. They were only made from 1929 – 1932 according to “Antique and Collectible Stanley Tools: Guide t...
Defiance #1213 by Stanley
Stanley Defiance #1213
This Stanley Defiance makes a pretty decent scrub plane. The blade has been sharpened with a camber and the mouth is already wide enough for some good size shavings.
Here is my write up on Defiance
Actual specs:
Length 9”
...
Defiance #1244 by Stanley
Stanley Defiance #1244
This Stanley Defiance makes a pretty decent scrub plane, although it has a chip breaker so may work as a very light smoother. The blade has been sharpened on this plane, it is as I found it..
Here is my write up on Defiance
Actual...
Defiance #1244 by Stanley
Stanley Defiance #1244
Here is my write up on Defiance
Actual specs:
Length 9 1/4”
Width 2 1/8”
Cutter width 1 13/16”
Weight 2 lb 2.4 ozs
Defiance #1245 Jack Plane by Stanley
This is a cleaned Defiance #1245 jack plane.
Defiance makes a great low cost jack plane for the woodworker who only needs a hand plane occasionally. The defiance 1245 never had a lateral adjustment mechanism so they are ideal for a light weight jack...
Defiance #205 Block Plane by Stanley
Defiance #205 Block Plane by Stanley
Description from hansbrunnertools.com
offered 1927-1934
6 1/4" long with a 1 1/2" cutter
Pressed/folded steel construction. Originally part of the Stanley tool chest for boys, later integrated...
Stanley Block Plane Examples
A Pair of Stanley #12-101 Finger Planes
A Pair of Stanley #12-101 Finger Planes
Additional Stanley Block Plane Examples
(My #12-101-012324-1)
Stanley #100 Squirrel tail Block Plane
Stanley #100 Squirrel tail Block Plane
Stanley Block Plane Examples
(My #100-032223-2)
Stanley #100 Squirrel tail Block Plane
Stanley #100 Squirrel tail Block Plane
Stanley Block Plane Examples
(My #100-032223-3)
Stanley #101 (newer model #12-101)
Stanley #101 (newer model #12-101)
Additional Stanley Block Plane Examples
Stanley #102 Block Plane
Stanley #102 Block Plane
Additional Stanley Block Plane Examples
(My #102-110918-1)
Stanley #102 Type 1 Block Plane
offered 1876 - 1962
5 1/2" long with a 1 3/8" cutter
Small enough for a nail bag or a coat pocket. No adjuster of any kind and that's not always a bad thing. If you keep the blade razor sharp the plane works just fine but if you can't live without...
Stanley #103 Block Plane
Stanley #103 Block Plane
These are sometimes referred to as an apron plane, since they will fit in a pocket
offered 1876 – 1950
5 1/2″ long with a 1 3/8″ cutter. 1 (1 1/4″ in early models)
Same as the 102 with a lever type adjuster for the...
Stanley #103 Block Plane
Stanley #103 Block Plane .. These are sometimes called an apron plane since they are small enough to fit in an apron pocket
https://www.timetestedtools.net/2019/05/22/the-simple-block-plane/
(My 103-022423-1)
Stanley #110 Block Plane
Read this if you're on the fence about a #110 style block plane
Stanley #110 Block Plane
\n
Additional Stanley Block Plane Examples
(My #110-082920-3)
Stanley #110 Block Plane With Original Box
Stanley #110 Block Plane With Original Box
Additional Stanley Block Plane Examples
(My #110-082420-1)
Stanley #110 Block Plane With Original Box
Stanley #110 Block Plane With Original Box
Additional Stanley Block Plane Examples
(My #110-010923-2)
Stanley #110 Block Planes
Stanley #110 Block Plane
Additional Stanley Block Plane Examples
(My #BN-021118-F)
Stanley #110 TWO TONE BLOCK PLANE.
STANLEY Two Tone #110 (?) BLOCK PLANE.
Stanley Block Plane Examples
Stanley #118 Steel Block Plane
Stanley #118 Steel Block Plane (No. 118P)
The pressed steel construction supposedly makes this plane unbreakable. It was originally intended for use in schools. The low angle cutter makes this plane a decent user for most jobs.
...
Stanley #120 Block Plane
Stanley #120 Block Plane
Additional Stanley Block Plane Examples
(My# 120-011123-3)
Stanley #130 Double End Block Plane
Stanley #130 Double End Block Plane
Note the bull nose end guard has was broke off.
Japanning is original and about 65-75%
Stanley Block Plane Examples
Stanley #140 Skewed Rabbet & Block Plane
Stanley #140 Rabbet and block plane, 7"L, 1 3/4"W (1 5/8", 1936 on), 1 1/8lbs, 1896-1944.
Quote from Supertool.com
"This is a very useful plane, and is one of Stanley's better products (it would have been even better if they didn't supply it with the...
Stanley #15 Block
The #15 is the same as a #9 1/2 except it is 7" long instead of 6". These are a bit harder to find.
This block plane has been tuned and sharpened and is ready to go to work.
____
...
Stanley #15 BLOCK Plane
STANLEY #15 BLOCK Plane
The #15 is like the Stanley #9 1/2 except it is 7" long instead of 6. It's also harder to find.
Stanley #18 1/4 Knuckle Block Plane
Stanley #18 1/4 Knuckle Block Plane
This came with the red paint. I did not try to remove it.
Stanley Block Plane Examples
(My #18.1-4-090920-6)
Stanley #18 Knuckle Block Plane
Stanley #18 Knuckle Block Plane
This is a decent Stanley user block plane. Some of the japanning is gone. I've sharpened the replacement blade which has a extra sharp bevel. I decided not to waste the metal to grind it out, It can be sharpened out...
Stanley #18 Knuckle Block Plane
Stanley #18 Knuckle Block Plane lightly cleaned, tuned sharpened oiled and tested. Blade is a newer vintage but in good shape. It's ready for another lifetime of woodworking.
What you see on the sole is staining, not pitting.
...
Stanley #18 Knuckle Block Plane - Type 2 - 1889-1893
Stanley #18 Knuckle Block Plane - Type 2 - 1889-1893
So, what's this knuckle joint lever cap anyway? It, in my opinion, is one of the coolest contraptions ever to leave New Britain. The second design of the lever cap, that is.
The knuckle joint...
Stanley #18 Knuckle Block Plane Type 2
Stanley #18 Knuckle Block Plane Type 2
Additional Stanley Block Plane Examples
(My #18-011023-1)
Stanley #18 type 3 Knuckle Block Plane
Stanley #18 type 3 Knuckle Block Plane
Additional Stanley Block Plane Examples
(My #18-011123-1)
Stanley #18 with a Shop Made Tail Handle
Stanley #18 with a Shop Made Tail Handle that I made
Additional Stanley Block Plane Examples
My #18-021718-1)
Stanley #19 Block plane
Stanley #19 Knuckle Block plane, 7"L, 1 5/8"W, 1 5/8lbs, 1888-1949.
The #19 is just like the #18 but 1" longer.
n
Stanley #19 Knuckle Block Plane Type 4
Stanley #19 Knuckle Block Plane Type 4 - circa 1898
This plane is in pretty nice shape. As with many many examples, a previous owner decided the eccentric lever was more bother than it was worth and left it in his tool box, never to be seen again....
Stanley #220 Block Planes
Stanley #220 Block Planes
An Additional Stanley #220 Block Plane
https://www.timetestedtools.net/2019/05/22/the-simple-block-plane/
Additional Stanley Block Plane Examples
(My...
Stanley #60 1/2 Block Plane
Stanley #60 1/2 Block Plane
Stanley #60 1/2 Block Plane
Stanley Block Plane Examples
Stanley #60 1/2 Block Plane
Stanley #60 1/2 Block Plane
Additional Stanley Block Plane Examples
(My #60.5-082120-2)
Stanley #65 1/2 Block plane
Stanley #65 1/2 Block plane
#65 1/2 Block plane, 7"L, 1 5/8"W, 1 3/8lbs, 1902-1950. (ref supertool.com).
It is Identical to the #60 1/2, except that its iron is wider, and a little harder to find.
According to supertool.com, the cap and front knob...
Stanley #65 Block Plane
Stanley #65 Block Plane
Additional Stanley Block Plane Examples
(My #65-070417-1)
Stanley #9 1/2 Block Plane - A Great User
Stanley #9 1/2 Block Plane - A Great UserAll I've done to this plane was clean it with wd-40 and a tooth brushOil it with Fluid FileSharpen itTested it on some hard maple.
Take it out of the package and use it!!
...
Stanley #9 1/2 Type 4
I believe this is a Stanley #9 1/2 Type 4 but I believe the cap is a little later (or??)
This can be a user or collector or both. Plenty of life left in the blade. I have only done a quick sharpening (it needs more to use it)
I slid a washer under...
Stanley #9 1/2 type 8a Block Plane
Stanley #9 1/2 type 8a Block Plane
I believe this is a type 8a
A very usable block plane with a bit of a cool factor. Old enough to be really vintage. It's got some faults, but nothing from keeping it from being a go to block plane.
...
Stanley #9 1/4 Block Plane
Stanley #9 1/4 Block Plane
This plane has been cleaned up, the base was repainted and everything is in working order.
virginiatoolworks says the No. 9-1/4 is 6 inches long and standard angle, this plane was identical to the no. 9-1/2 in every...
Stanley #9 1/4 Block Plane
#9 1/4 Block plane, 6"L, 1 5/8"W, 1 1/4lbs, 1947-1982.
This is a general purpose block plane. It has its iron bedded at 20 degrees. The iron is adjustable both for depth and lateral positions. The mouth is non-adjustable, which is the distinguishing...
Stanley #A18 Block Plane
Stanley #A18 Block Plane
Additional Stanley Block Plane Examples
(My # A18-100420-2)
Stanley #S18 Block Plane
Stanley #S18 Block Plane
Additional Stanley Block Plane Examples
(My #S18-100122-1)
Stanley 60 1/2 Block Plane
Stanley 60 1/2 Block Plane. Blade is marked No. 60 1/2P (13-060A)
Although this is a newer model, this is still arguably one of the best user block planes Stanley made. I know a lot of woodworkers who swear by the 60 1/2.
This one came to me in pretty...
Stanley 60 1/2 Block Plane
Stanley 60 1/2 Block Plane
6"L, 1 1/2"W, 1 1/4lbs, 1902-1982.
The standard low angle block plane most of us recognize. This plane is very popular due to its size - it fits nearly completely in an average-sized hand - and its weight makes it ideal for...
Stanley 9 1/2 Block Plane
Stanley 9 1/2 Block Plane
Additional Stanley Block Plane Examples
(My #9.5-011123-2)
Stanley 9 1/2 or 9 3/4 Type 5
As found a pretty cool piece.
The pictures tell the story. I believe it's a type 5 with a bronze cast tail. (1880-1885)
(My # 95-082620-1)
Stanley Block Plane #102
#102 Block plane, 5 1/2"L, 1 1/4"W (1 3/8", 1914 on (1 5/16, 1962), 7/8lb, 1877-1962.
Completely restored, stripped, repainted sharpened and ready for work.
//
Additional Stanley Block Plane Examples
Stanley Victor Hand Plane Examples
Stanley Siegley Examples
Stanley Siegley #18 Block Plane
Back to Siegley History
Stanley Siegley Hand Plane Examples
(My # S-021223-4)
Liberty Bell Examples
STANLEY #129 Liberty Bell Transitional Fore Plane
STANLEY #129 Liberty Bell Transitional Fore Plane
20"L, 2 3/8"W, 5 5/8lbs, 1877-1918.
STANLEY #129 Transitional – Liberty Bell
Back to History-->
All My Liberty Bell Examples
(MY #129-081017-16)
...
Stanley #104 Liberty Bell Smoothing Plane
Stanley #104 Liberty Bell Smoothing Plane 1877-1918
Length 9" Width of cutter 2 1/8" Weight 3 1/8#
Back to History-->
Stanley #105 Liberty Bell Jack Plane
Stanley #105 Liberty Bell Jack Plane 1877-1918
Length 14"Width of cutter 2 1/8"Weight 3 7/8#
Back to History-->
(My # 105-030423-2)
Stanley #105 Liberty Bell Jack Plane with Undocumented Raised Tote Receiver
Stanley #105 Liberty Bell Jack Plane with Undocumented Raised Tote Receiver. It is probably the last type.
Note the side by side comparison with a typical Liberty Bell and the type with a flat receiver.
Back to History-->
...
Stanley #122 TRANSITIONAL LIBERTY BELL
STANLEY #122 Transitional Liberty Bell
This is a Liberty Bell Plane
Stanley #122 Smooth plane, 8"L, 1 3/4"W, 2 3/8lbs, 1877-1917.
Back to History-->
(MY # 122-081017-2)
(My #122-022523-1)
Stanley #122 Transitional Liberty Bell Type 1
Stanley #122 Transitional Liberty Bell Type 1
Stanley #122 Smooth plane, 8"L, 1 3/4"W, 2 3/8lbs, 1877-1917.
Stanley #127 TRANSITIONAL – LIBERTY BELL
Stanley #127 TRANSITIONAL – LIBERTY BELL 1877-1918
Length 15"Width of cutter 2 1/8"Weight 3 1/2#
Back to History-->
Stanley #127 Transitional Jack Plane
Stanley #127 TRANSITIONAL – LIBERTY BELL 1877-1918
Length 15"Width of cutter 2 1/8"Weight 3 1/2#
Back to History-->
(My #127-020623-4)
Stanley #135 Transitional - Liberty Bell
STANLEY #135 Transitional - Liberty Bell
STANLEY #135 Smooth plane, 10"L, 2 1/8"W, 3lbs, 1877-1918.
I believe this plane was made between 1876-1886.
Back to History-->
(MY #135-081017-8)
...
Stanley Liberty Bell #105 Jack Plane
Stanley Liberty Bell #105 Jack Plane
14" Long Weight 3# 8oz
The Liberty Bell Main Page-->
Liberty Bell Examples
(My #105-011523-3)
________________
As an Amazon associate, we earn income from qualifying purchases when you click on a link. Your link clicks help us fund our website.________________