Dunlap Push Drill
Dunlap was a line of Sears trademarked tools
A push drill is a hand drill that looks like a screwdriver, but rotates when pushed. The force of your hand travels straight through the bit into the wood, making it easy to drill small, plumb holes for nails and screws. Push drills are best for drilling blind holes into wood, such as pilot holes for screws. They’re also useful for shallow drilling, such as for hinges on cabinet doors or jewelry boxes
Other Misc Tools
14" Marking Gauge
Shop Made
14" Shop Made Marking Gauge
Aluminum wear plate on fence and rod.Pin is made from a broken drill bit held buy a brass screw threaded in the end.BLO finish
Misc Tool Examples
(My #M-091424-7)
...
15 3/4" Woodworking Razee Jack Plane
15 3/4" Woodworking Razee Jack Plane
This plane can also easily be returned to service with a little restoration work if desired. It is in good enough condition, but not many woodworkers use this type of hand tools any more. That is why it is listed...
23 1/4" Laminated Wood Jointer Plane
23 1/4" Laminated Wood Jointer Plane. 2 5/8" blade
Blade is marked "Auburn Tool Co" with the thistle brand logo
6 in Unknown maker Bit brace
6 in Unknown maker Bit brace
Very nice rosewood handles
Other Misc Tools
(My #6-041723-1)
Baldwin Tool Co. Wooden Smoothing Plane
Baldwin Tool Co. Wooden Smoothing Plane
The blade is marked Baldwin Tool Co. Smoother with no marking on the plane, so I do not know if it's just the blade made by them or both.
I restored this nice smoother a few years ago and it's just been...
Clifton #4 Smoother
Clifton #4 Smoother
Plane spec's· Length 9 13/16"· Width 2 1/2"· Cutter width 2"· weight 4# 7 oz
Misc
Dunlap Push Drill
Dunlap Push Drill
Dunlap was a line of Sears trademarked tools
A push drill is a hand drill that looks like a screwdriver, but rotates when pushed. The force of your hand travels straight through the bit into the wood, making it easy to drill...
Fulton Rebate Like Stanley #78
Fulton Rebate Like Stanley #78
Completely disassembled, lightly cleaned and oiled.
Note the repaired fence
Misc Tool Gallery
(My #78-082723-1)
German Knock-off of Stanley #101 Thumb Plane
German Knock-off of Stanley #101 Thumb Plane
I can not make out the logo, but the bottom line is Germany and the top line ends in "N". Very possibly "Jordan"
Misc & Unknown
(My #101-012224-1)
Hudson Tool version of the Stanley #130.
Here is the Hudson Tool version of the Stanley #130. I am not sure who actually made this but look at the blade thickness. It’s definitely thicker than the normal Stanley version. It will make a fine user or the rare collector of Hudson Tools.
...
J. Kellogg 30" Jointer
J. Kellogg 30" wood bodied jointer
I found this plane in Bellows Falls VT
30" long - 2 3/4' blade
J. Kellogg, Amherst MS.According to The guide to the makers of American wooden planes, J.Kellogg made planes from 1839-67.
The stamp is...
J.P. PEARCE COFFIN PLANE
J.P.Pearce New York. 7 7/8" long with a "The Chapin-Stephens Co' Pine Meadows Conn USA iron. In very good shape
(My #061722-6)
John Veit 22in Fore Plane
John Veit 22in Wood Bodied Fore Plane
With this piece you can Show some Hand Tool Woodworking history from Craftsman from days past. This is a typical hand plane used in the 1700-1800 and before. It would be considered rustic or primitive decor....
Massive 28" Wood Bodied Jointer
Massive 28" Wood Bodied Jointer
Probably European in origin. My guess is it is made from some type of European oak, but that's just a guess.
It's definitely a well made hand plane and will make an exceptional woodworking jointer plane.
It's...
Metro Tool Works - Germany- Two Speed Breast Drill
Metro Tool Works - Germany- Two Speed Breast Drill
Misc Tools
(My #D-090924-4)
Millers Falls 10" Lion Patented #772 Bit Brace
Millers Falls 10″ Lion Patented #772 Bit BraceThis was one of Millers Falls best and most successful in It’s line of many bit braces. The success was primarily due to the excellent "Lion" chuck and Leland"s universal jaws. The jaws are capable of hol...
Millers Falls Push drill No. 100
Millers Falls Push drill No. 100
A push drill is a hand drill that looks like a screwdriver, but rotates when pushed. The force of your hand travels straight through the bit into the wood, making it easy to drill small, plumb holes for nails and...
NOS Stanley #68 Ruler with Original Box
NOS Stanley #68 Ruler with Original Box
Box original held one dozen
Additional Misc tools
Old Wooden Vise Screw
Pictures tell the story. It can use a little love and attention. It Can be used for a bench vise project or just as a conversation piece in your shop or man cave.
R&L Carter Troy NY 26in Jointer
R&L Carter Troy NY 26in Jointer - Wood Working Jointer or Fore Plane
With this piece you can Show some Hand Tool Woodworking history from Craftsman from days past. This is a typical hand plane used in the 1700-1800 and before. It would be considered...
Rosewood 26 1/4" Jointer Plane -Wood Bodied - Walnut Handle & Wedge
Rosewood 26 1/4" Jointer Plane -Wood Bodied - Walnut Handle & Wedge
An absolutely gorgeous Rosewood Jointer with Walnut handle and wedge.26 1/4" log x 2 5/8" wide with a 2 1/4" iron
Look close at the pictures and video, they tell the story...
Rosewood Jointer with Maple handle and wedge.
Rosewood Jointer with Maple handle and wedge.
23 1/8" log x 2 5/8" wide with a 2 1/8" iron
(My #5-2015-1)
Sargent Made Craftsman 3470BL Smoothing Plane
Sargent Made Craftsman 3470BL Smoothing Plane
A Gallery of Sargent Hand PlanesShows in (Page)--- Sargent
(My #3470-031523-2)
Scioto Works 22in Fore Plane
Scioto Works 22in Fore PlaneIt is 22" long with a 2 1/2" wide blade. It has ruminants of the thistle brand logo
Scioto was a second grade of The Ohio Tool Company which was founded in Columbus Ohio in 1851 by Peter Hayden, of P. Hayden & Co....
Stanley #42X SAW SET In Original Box
In original box but as you can see, the box itself has seen better days
Stanley #51 Spoke shave
Stanley #51 Spoke shave, cleaned oiled and sharpened.
Additional Misc tools
(My #51-082823-5)
Stanley #813 12 inch Bit Brace
Stanley #813 12 inch Bit Brace
Lightly cleaned (see photos)
Everything is in working order. Ratchets work smooth. Lightly oiled.
(MY #S-813-12in)
Tri-Ess Block Plane
Tri-Ess Block Plane
I assume these are from a kid's toy box but I've never found any information.
Additional Misc tools
(My #T-102624-2)
Union Factory 22in Jointer
Union Factory 22in Jointer with a 2 1/2" iron
All I've done is a light cleaning and this plane is ready to work just as it is.
UNION FACTORY - Ref: A Guide to the Makers of American Wooden Planes by Martyl Pollak, Edward A. Fagen, Emil Pollak....
Unity #130 Double Ended Block Plane
Unity #130 Double Ended Block PlaneMade in GermanyPictures are the details, I have never found any history.
Additional Misc tools
(My #130-101324-3)
W S Woodstud. 9" long Coffin Smoothing Plane with an 1 7/8" Moulson Bros Iron
Marked W S Woodstud. 9" long with an 1 7/8 Moulson Bros iron. This is made from a heavy (probably exotic) hardwood that I can not identify. It has some repairs but is sharp and working. (not my repairs but they are solid)
...
Wards Master Quality Pistol Grip Push Drill
Wards Master Quality Pistol Grip Push Drill with Bits
(My #D-022824-4)
Weston No.1 - Vintage bench dog - Mechanical, not wood - Planing Stop
Vintage bench dog - Mechanical, not wood
It’s a Weston No.1 according to the Hammacher Schlemmer & Co. Catalog.
The Planing Stop, bench stop, planing stop or sometimes called a bench dog is a a metal set flush with the top of a workbench a...
Winchester No. 3523 10" Bit Brace
Winchester No. 3523 10" Bit Brace, as found, it has not been cleaned yet. It functions as expected and will clean up easily.
Other Misc Tools
(My #3523-120323-4)
Wooden Horned Scrub Plane
Wooden Horned Scrub Plane
8 3/4" long with a 1" blade
Obviously the horn has been replaced. It's probably European. No name on either the blade or the plane.
Scrub planes are one of the most fun planes to use. Chips just fly everywhere....
Yankee Bench Mount Drill Press No. 1005 North Bros MFG Patent 1912.
Yankee Bench Mount Drill Press No 1005 North Bros MFG Patent 1912.
Yankee Bench Mount Drill PressNo. 1005North Bros / YankeePatent Dates as shown on the Steel Plate: July 23 1912, April 1 1913, Fed 17 1914, July 14 1914, Others Pending
Good Condition,...
(My #D-051524-2)
________________
As an Amazon associate, we earn income from qualifying purchases when you click on a link. Your link clicks help us fund our website.________________