Millers Falls Examples

Craftsman Made by Millers Falls Smoother The knob and tote is original. They were both stained, but I repaired the horn on the tote and uncovered some gorgeous grain, so it was stripped and lacquered. The knob was lightly sanded and lacquered with...

Dunlap #4 Smoother by Millers Falls The blade seems to be of decent quality and once tuned, it's a nice working plane. We see the typical Millers Falls overspray and the frog seats were painted. A little sandpaper took care of that. With...

Millers Falls #07 Skewed Rabbet Plane Like a Stanley #140, the Millers Falls #07 has a skewed cutter and a removable side plate. With the plate removed the block plane turns into a rebate plane. The skewed cutter works well on all types of woods and...

Millers Falls #10 Smoothing Plane This Millers Falls #10 was featured in this restoration series https://www.timetestedtools.net/2016/01/26/bench-plane-restoration-guide-part-1/ Additional Millers...

Millers Falls #11 Junior Jack is the same size as a Stanley #5 1/4.

Millers Falls #14 Jack All finishes on metal are original. Some typical chips and scratches but overall in decent shape. The knob and tote are original. They have been lightly sanded and a new coat of lacquer. What I believe is a type 4 A slight camber...

Millers Falls #14 Jack Plane As Found After Cleanup and repair Additional Millers Falls Examples (My #6-2012)

Millers Falls #16 Plane

Millers Falls #18 Fore Plane Millers Falls Examples (My#14b 4-2013) -

MILLERS FALLS #18C Fore (type-1) This is the same size as a Stanley #6. Millers Falls Examples

Millers Falls #1950 Bit Brace (Hand Drill) Additional Millers Falls Examples

Millers Falls #22 Jointer Plane Thanks to Rob Morgan for sending this in Additional Millers Falls Examples

Millers Falls #37 KNUCKLE BLOCK  

MILLERS FALLS #56 Block  like a Stanley 60 1/2 I      // Additional Millers Falls Examples

Millers Falls #7 Smoother All finishes on metal are original The knob and tote are original. What I believe is a type 2 but without brass tote and knob nuts. As found other than a light cleaning.

Millers Falls #85 Rabbet and Fillester Plane  (Exactly like the Stanley 78) Equipped with two cutter seats—rear seat with a lever adjustment for cutter depth and forward seat for bull nose work. Adjustable fence on steel arm can be used on either si...

Millers Falls #9 Smoothing Plane Additional Millers Falls Examples (My #9-012718-2)

Millers Falls #9 Smoothing Plane Additional Millers Falls Examples

Millers Falls #9 Smoothing Plane --------- Millers Falls Examples (My #9-123015-1)

Millers Falls #900 Smoother Additional Millers Falls Examples

Millers falls #900 SMOOTHER_ This took a lot of work. The sole was out of flat quite a bit more than average. Note the sole still has a dish in the back part but the requires spots are coplanar and it’s ready for smoothing. The blade seems t...

Millers Falls #900 Smoother Additional Millers Falls Examples (My #900b-020918-3)

Millers Falls #900 Smoothing Plane Additional Millers Falls Examples (My #900-020918-4)

Millers Falls #9C Smoothing Plane - Millers Falls Examples (My #9C -062122-2)

A nice heavy small block plane. These are known as unadjustable, simply because the adjustment is manual. This plane is completely as found other than a very light cleaning. I don't believe it's ever been sharpened.

Millers Falls Made Fulton #3708 (#2 size) Smoother

Millers Falls Type 1 #9 Smoothing Plane Please look closely at the pictures. The tote was broken at one point in it's past. The previous owner glued it but never finished, so both the knob and tote has been sanded and refinished. The sides look...