Cortland Saw Etch – Phenix Medallion (Secondary Line of Atkins)

A great starter set of Disston Hand Saws. Reasonably sharp as they are and a great set to hone your sharpening skills on. A crosscut and a rip. Both are 26" Additional Saw Examples (My #D-020323-1)...

Atkins 26 #54 Crosscut 10ppi Sharpened Additional Saw Examples (My #54-020323-2)

Cortland Saw Etch - Phenix Medallion (Secondary Line of Atkins) 20" 8ppi Additional Saw Examples (My #p-012224-4)

26" More infor on the Disston #12 from the Disston institute http://www.disstonianinstitute.com/12page.html (My #12-020223-2)

Disston #4 Miter Saw NEW. I don't believe this saw has never been used. It still has the original from the factory coating. Additional Saw Examples (My #D4-012624-3)

Disston 12" backsaw Crosscut @ 13 TPI (My #D-060619-1)

Disston 26" Crosscut D-20 Hand Saw Lightly cleaned and filed to clean and freshly sharpening. Additional Saw Examples (My #D20-061119-1)

Disston 26″ D8 Crosscut Hand Saw  Sharpened Additional Hand Saw Examples (My #D8-020323-5)

Disston D8 26" Thumbhole Rip Saw As found but should be an easy cleanup. A very strong etch. Additional Saw Examples (My #D8-012224-8)

Hargreaves, Smith & Co. 26" Crosscut Hand Saw Missing a couple split nuts Additional Hand Saw Examples (My #G-020323-3)

Harvey Peace 12" backsaw Crosscut @ 11 TPI

Harvey Peace Hand Saw with Pat July 3, 1883 The pictures tell the story - No Etch - Warranted Superior Medallion. US Patent: 280,612Reinforcing Plate for Saw Handles Additional Saws (My...

Harvey Peace #45 Hand Saw More of the history is here including the Disston #D-24--> This saw has been cleaned and repaired When Disston acquired Harvey Peace in 1893 this model was so popular that Disston...

This is a Jefferson 14" Backsaw sold by Sargent. Their designated #41. I've Lightly cleaned and sharpened this.  According to Hand-Saw makers of North America (Erwin L. Shaffer) Sargent sold saws by several saw makers--e.g. Disston, Simons,...

I think this saw may be a Madden, Wheeler, and Clemson, Middletown N.Y. This company's facility was called the Monhagen Saw Works. In 1860, Elisha P. Wheeler, Edward M. Madden and Josiah Bakewell became "Wheeler, Madden & Clemson,"  28" ...

R. Groves & Sons 26″ Crosscut Hand saw Additional Hand Saw Examples (My #RG-020323-4)

Rockwell 26" Crosscut Hand Saw Sharpened Rockwell Tools is a line of power tools that is currently owned and distributed by Positec Tool Corporation , a China-based company with North American headquarters in Charlotte, North Carolina. ...

Sargent & Co. Saw vise Model 100 (My #100-020624-2)

Sargent & Co. Saw vise Model 104 Note the plate on the clamp is one that I made to replace the missing plate. I used this vise for a while, so it all works. Everything moves freely and works as it should. I would just suggest oiling everything...

Simmonds Made Stanley Sweetheart Miter Saw Pictures tell the story Includes an ash Tooth Guard Additional Saw Examples (My #SW-012624-4)

Unknown 22 split nut Crosscut Hand Saw Cleaned up and handle refinished Additional Saw Examples (My # HS-012224-9)

Unknown Maker Saw Vise (Slightly larger than normal) Note the missing clamp plate. It works as is but you could either make a plate of just use a piece of scrap to protect whatever you are clamping to. (MY# ...

Unmarked ( Warranted Superior  ) Hargreaves, Smith & Co. 28" Rip Hand Saw Additional Saw Examples (My #G-012524-5)

Unmarked Saw Vise Additional Saw Examples (My #SV-012524-7)

Warranted Superior 26" RIP Hand Saw