Stanley Type 4

Stanley Home– Type 1 – Type 2 – Type 3 – Type 4 – Type 5 – Type 6 – Type 7 – Type 8 – Type 9 – Type 10 – Type 11 – Type 12 – Type 13 – Type 14 – Type 15 – Type 16 – Type 17 – Type 18 – Type 19 – Type 20 – Type 21 – Bases – Cutters

Type 4      1874-1884

All features of TYPE 3 except that these are now equipped with the standard full size frog as TYPE 2. Tip of “Y adjusting lever no longer rounded.

— Frog receiver is enlarged but still low & milled smooth. The number 73 cast in bed behind frog receiver is apparently just a foundry’s casting code because #2’s of the same vintage have the number 71 cast here.
*Flat head cap screws now used to hold frog.

* #5 thru #8 have rounded edge on front of raised receiver for handle.

**No Lateral Adjuster
**Low front knob
**Bead at base of knob
**Plane Size Not Cast in bed
**”Bailey” Not Cast in bed
**Small depth adjuster nut (1”) recessed
**Depth adjuster nut stamped “BAILEY’S PATENT”…2 patents

Aug 31 1853,    Aug 6 1867

**Right handed depth adjuster nut
**Foundry numbers – “73”,”71″ cast in bed etc.
**Circular hole in cutter at the top of the slot.
**Keyhole shaped hole in lever cap
**No logo on the lever cap
**Flat headed frog screws
**Back to one piece frog

Based on Rogers Smiths PTAMPIA Vol 1

More type 4 Examples

Stanley #4 Pre Lateral Smoother

Stanley #4 Pre Lateral Smoother  This came to me with a Fulton blade. I’ve added a vintage correct blade, but will send the Fulton. I have NOT tuned this plane in any way. I’ll leave that to the new owner if they decide to use it. I have dom...

Stanley #6 Fore Plane TYPE 4 PRE-LATERAL

Stanley #8 JOINTER TYPE 4 PRE-LATERAL

Stanley #6 type 4 Fore Plane

Stanley #6 type 4 Fore Plane More Stanley type 4 Examples (My #100322-1)

Stanley #8 Jointer Plane Type 4

Stanley #8 Jointer Plane Type 4. Cleaned and tuned. A knob replacement and a Blade replacement. The blade is new old stock but from a later vintage. See photos for japanning. Lots of white paint spatters. This will now be a nice users for another 150...

Stanley #8 JOINTER TYPE 4 PRE-LATERAL

STANLEY #8 JOINTER TYPE 4   Pre-Lateral STANLEY #8 Jointer, 24"L, 2 5/8"W, 9 3/4lbs, 1898-1961. See the photo’s they tell the story. A nice early example of the Stanley Bailey Jointer. The japanning was in rough shape when I found it so it’s bee...